Constant Field Values

Contents

• org.apache.*

org.apache.*

org.apache.camel.kafkaconnector.vertxwebsocket.CamelVertxwebsocketSinkConnectorConfig

Modifier and Type	Constant Field	Value
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_AUTOWIRED_ENABLED_CONF	"camel.component.vertx-websocket.autowiredEnabled"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_AUTOWIRED_ENABLED_DOC	"Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc."
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_LAZY_START_PRODUCER_CONF	"camel.component.vertx-websocket.lazyStartProducer"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_LAZY_START_PRODUCER_DOC	"Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel\'s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing."
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_ROUTER_CONF	"camel.component.vertx-websocket.router"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_ROUTER_DOC	"To provide a custom vertx router to use on the WebSocket server"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_USE_GLOBAL_SSL_CONTEXT_PARAMETERS_CONF	"camel.component.vertx-websocket.useGlobalSslContextParameters"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_USE_GLOBAL_SSL_CONTEXT_PARAMETERS_DOC	"Enable usage of global SSL context parameters."
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_VERTX_CONF	"camel.component.vertx-websocket.vertx"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_VERTX_DOC	"To use an existing vertx instead of creating a new instance"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_VERTX_OPTIONS_CONF	"camel.component.vertx-websocket.vertxOptions"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_COMPONENT_VERTX_OPTIONS_DOC	"To provide a custom set of vertx options for configuring vertx"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_ENDPOINT_CLIENT_OPTIONS_CONF	"camel.sink.endpoint.clientOptions"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_ENDPOINT_CLIENT_OPTIONS_DOC	"Sets customized options for configuring the WebSocket client used in the producer"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_ENDPOINT_CLIENT_SUB_PROTOCOLS_CONF	"camel.sink.endpoint.clientSubProtocols"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_ENDPOINT_CLIENT_SUB_PROTOCOLS_DOC	"Comma separated list of WebSocket subprotocols that the client should use for the Sec-WebSocket-Protocol header"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_ENDPOINT_LAZY_START_PRODUCER_CONF	"camel.sink.endpoint.lazyStartProducer"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_ENDPOINT_LAZY_START_PRODUCER_DOC	"Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel\'s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing."
public static final String	CAMEL_SINK_VERTXWEBSOCKET_ENDPOINT_SEND_TO_ALL_CONF	"camel.sink.endpoint.sendToAll"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_ENDPOINT_SEND_TO_ALL_DOC	"To send to all websocket subscribers. Can be used to configure on endpoint level, instead of having to use the VertxWebsocketConstants.SEND_TO_ALL header on the message."
public static final String	CAMEL_SINK_VERTXWEBSOCKET_ENDPOINT_SSL_CONTEXT_PARAMETERS_CONF	"camel.sink.endpoint.sslContextParameters"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_ENDPOINT_SSL_CONTEXT_PARAMETERS_DOC	"To configure security using SSLContextParameters"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_PATH_HOST_CONF	"camel.sink.path.host"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_PATH_HOST_DEFAULT	"0.0.0.0"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_PATH_HOST_DOC	"The host that the consumer should bind to or the host of the remote websocket destination that the producer should connect to"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_PATH_PATH_CONF	"camel.sink.path.path"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_PATH_PATH_DEFAULT	"/"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_PATH_PATH_DOC	"The path that the consumer should bind to or path of the remote websocket destination that the producer should connect to"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_PATH_PORT_CONF	"camel.sink.path.port"
public static final String	CAMEL_SINK_VERTXWEBSOCKET_PATH_PORT_DOC	"The port that the consumer should bind to or port of the remote websocket destination that the producer should connect to"

org.apache.camel.kafkaconnector.vertxwebsocket.CamelVertxwebsocketSourceConnectorConfig

Modifier and Type	Constant Field	Value
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_AUTOWIRED_ENABLED_CONF	"camel.component.vertx-websocket.autowiredEnabled"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_AUTOWIRED_ENABLED_DOC	"Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc."
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_BRIDGE_ERROR_HANDLER_CONF	"camel.component.vertx-websocket.bridgeErrorHandler"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_BRIDGE_ERROR_HANDLER_DOC	"Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_ROUTER_CONF	"camel.component.vertx-websocket.router"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_ROUTER_DOC	"To provide a custom vertx router to use on the WebSocket server"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_USE_GLOBAL_SSL_CONTEXT_PARAMETERS_CONF	"camel.component.vertx-websocket.useGlobalSslContextParameters"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_USE_GLOBAL_SSL_CONTEXT_PARAMETERS_DOC	"Enable usage of global SSL context parameters."
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_VERTX_CONF	"camel.component.vertx-websocket.vertx"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_VERTX_DOC	"To use an existing vertx instead of creating a new instance"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_VERTX_OPTIONS_CONF	"camel.component.vertx-websocket.vertxOptions"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_COMPONENT_VERTX_OPTIONS_DOC	"To provide a custom set of vertx options for configuring vertx"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_ALLOWED_ORIGIN_PATTERN_CONF	"camel.source.endpoint.allowedOriginPattern"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_ALLOWED_ORIGIN_PATTERN_DOC	"Regex pattern to match the origin header sent by WebSocket clients"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_BRIDGE_ERROR_HANDLER_CONF	"camel.source.endpoint.bridgeErrorHandler"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_BRIDGE_ERROR_HANDLER_DOC	"Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_EXCEPTION_HANDLER_CONF	"camel.source.endpoint.exceptionHandler"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_EXCEPTION_HANDLER_DOC	"To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_EXCHANGE_PATTERN_CONF	"camel.source.endpoint.exchangePattern"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_EXCHANGE_PATTERN_DOC	"Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_ROUTER_CONF	"camel.source.endpoint.router"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_ROUTER_DOC	"To use an existing vertx router for the HTTP server"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_SERVER_OPTIONS_CONF	"camel.source.endpoint.serverOptions"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_SERVER_OPTIONS_DOC	"Sets customized options for configuring the HTTP server hosting the WebSocket for the consumer"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_SSL_CONTEXT_PARAMETERS_CONF	"camel.source.endpoint.sslContextParameters"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_ENDPOINT_SSL_CONTEXT_PARAMETERS_DOC	"To configure security using SSLContextParameters"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_PATH_HOST_CONF	"camel.source.path.host"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_PATH_HOST_DEFAULT	"0.0.0.0"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_PATH_HOST_DOC	"The host that the consumer should bind to or the host of the remote websocket destination that the producer should connect to"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_PATH_PATH_CONF	"camel.source.path.path"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_PATH_PATH_DEFAULT	"/"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_PATH_PATH_DOC	"The path that the consumer should bind to or path of the remote websocket destination that the producer should connect to"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_PATH_PORT_CONF	"camel.source.path.port"
public static final String	CAMEL_SOURCE_VERTXWEBSOCKET_PATH_PORT_DOC	"The port that the consumer should bind to or port of the remote websocket destination that the producer should connect to"