Constant Field Values

Contents

• org.apache.*

org.apache.*

org.apache.camel.kafkaconnector.snmp.CamelSnmpSinkConnectorConfig

Modifier and Type	Constant Field	Value
public static final String	CAMEL_SINK_SNMP_COMPONENT_AUTOWIRED_ENABLED_CONF	"camel.component.snmp.autowiredEnabled"
public static final String	CAMEL_SINK_SNMP_COMPONENT_AUTOWIRED_ENABLED_DOC	"Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc."
public static final String	CAMEL_SINK_SNMP_COMPONENT_LAZY_START_PRODUCER_CONF	"camel.component.snmp.lazyStartProducer"
public static final String	CAMEL_SINK_SNMP_COMPONENT_LAZY_START_PRODUCER_DOC	"Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel\'s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_AUTHENTICATION_PASSPHRASE_CONF	"camel.sink.endpoint.authenticationPassphrase"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_AUTHENTICATION_PASSPHRASE_DOC	"The authentication passphrase. If not null, authenticationProtocol must also be not null. RFC3414 11.2 requires passphrases to have a minimum length of 8 bytes. If the length of authenticationPassphrase is less than 8 bytes an IllegalArgumentException is thrown."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_AUTHENTICATION_PROTOCOL_CONF	"camel.sink.endpoint.authenticationProtocol"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_AUTHENTICATION_PROTOCOL_DOC	"Authentication protocol to use if security level is set to enable authentication The possible values are: MD5, SHA1 One of: [MD5] [SHA1]"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_LAZY_START_PRODUCER_CONF	"camel.sink.endpoint.lazyStartProducer"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_LAZY_START_PRODUCER_DOC	"Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel\'s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_OIDS_CONF	"camel.sink.endpoint.oids"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_OIDS_DOC	"Defines which values you are interested in. Please have a look at the Wikipedia to get a better understanding. You may provide a single OID or a coma separated list of OIDs. Example: oids=1.3.6.1.2.1.1.3.0,1.3.6.1.2.1.25.3.2.1.5.1,1.3.6.1.2.1.25.3.5.1.1.1,1.3.6.1.2.1.43.5.1.1.11.1"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_PRIVACY_PASSPHRASE_CONF	"camel.sink.endpoint.privacyPassphrase"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_PRIVACY_PASSPHRASE_DOC	"The privacy passphrase. If not null, privacyProtocol must also be not null. RFC3414 11.2 requires passphrases to have a minimum length of 8 bytes. If the length of authenticationPassphrase is less than 8 bytes an IllegalArgumentException is thrown."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_PRIVACY_PROTOCOL_CONF	"camel.sink.endpoint.privacyProtocol"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_PRIVACY_PROTOCOL_DOC	"The privacy protocol ID to be associated with this user. If set to null, this user only supports unencrypted messages."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_PROTOCOL_CONF	"camel.sink.endpoint.protocol"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_PROTOCOL_DEFAULT	"udp"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_PROTOCOL_DOC	"Here you can select which protocol to use. You can use either udp or tcp. One of: [tcp] [udp]"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_RETRIES_CONF	"camel.sink.endpoint.retries"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_RETRIES_DOC	"Defines how often a retry is made before canceling the request."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SECURITY_LEVEL_CONF	"camel.sink.endpoint.securityLevel"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SECURITY_LEVEL_DOC	"Sets the security level for this target. The supplied security level must be supported by the security model dependent information associated with the security name set for this target. The value 1 means: No authentication and no encryption. Anyone can create and read messages with this security level The value 2 means: Authentication and no encryption. Only the one with the right authentication key can create messages with this security level, but anyone can read the contents of the message. The value 3 means: Authentication and encryption. Only the one with the right authentication key can create messages with this security level, and only the one with the right encryption/decryption key can read the contents of the message. One of: [1] [2] [3]"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SECURITY_NAME_CONF	"camel.sink.endpoint.securityName"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SECURITY_NAME_DOC	"Sets the security name to be used with this target."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SNMP_COMMUNITY_CONF	"camel.sink.endpoint.snmpCommunity"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SNMP_COMMUNITY_DEFAULT	"public"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SNMP_COMMUNITY_DOC	"Sets the community octet string for the snmp request."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SNMP_CONTEXT_ENGINE_ID_CONF	"camel.sink.endpoint.snmpContextEngineId"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SNMP_CONTEXT_ENGINE_ID_DOC	"Sets the context engine ID field of the scoped PDU."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SNMP_CONTEXT_NAME_CONF	"camel.sink.endpoint.snmpContextName"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SNMP_CONTEXT_NAME_DOC	"Sets the context name field of this scoped PDU."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SNMP_VERSION_CONF	"camel.sink.endpoint.snmpVersion"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SNMP_VERSION_DOC	"Sets the snmp version for the request. The value 0 means SNMPv1, 1 means SNMPv2c, and the value 3 means SNMPv3 One of: [0] [1] [3]"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SYNCHRONOUS_CONF	"camel.sink.endpoint.synchronous"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_SYNCHRONOUS_DOC	"Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported)."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_TIMEOUT_CONF	"camel.sink.endpoint.timeout"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_TIMEOUT_DOC	"Sets the timeout value for the request in millis."
public static final String	CAMEL_SINK_SNMP_ENDPOINT_TYPE_CONF	"camel.sink.endpoint.type"
public static final String	CAMEL_SINK_SNMP_ENDPOINT_TYPE_DOC	"Which operation to perform such as poll, trap, etc. One of: [TRAP] [POLL] [GET_NEXT]"
public static final String	CAMEL_SINK_SNMP_PATH_HOST_CONF	"camel.sink.path.host"
public static final String	CAMEL_SINK_SNMP_PATH_HOST_DOC	"Hostname of the SNMP enabled device"
public static final String	CAMEL_SINK_SNMP_PATH_PORT_CONF	"camel.sink.path.port"
public static final String	CAMEL_SINK_SNMP_PATH_PORT_DOC	"Port number of the SNMP enabled device"

org.apache.camel.kafkaconnector.snmp.CamelSnmpSourceConnectorConfig

Modifier and Type	Constant Field	Value
public static final String	CAMEL_SOURCE_SNMP_COMPONENT_AUTOWIRED_ENABLED_CONF	"camel.component.snmp.autowiredEnabled"
public static final String	CAMEL_SOURCE_SNMP_COMPONENT_AUTOWIRED_ENABLED_DOC	"Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc."
public static final String	CAMEL_SOURCE_SNMP_COMPONENT_BRIDGE_ERROR_HANDLER_CONF	"camel.component.snmp.bridgeErrorHandler"
public static final String	CAMEL_SOURCE_SNMP_COMPONENT_BRIDGE_ERROR_HANDLER_DOC	"Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_AUTHENTICATION_PASSPHRASE_CONF	"camel.source.endpoint.authenticationPassphrase"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_AUTHENTICATION_PASSPHRASE_DOC	"The authentication passphrase. If not null, authenticationProtocol must also be not null. RFC3414 11.2 requires passphrases to have a minimum length of 8 bytes. If the length of authenticationPassphrase is less than 8 bytes an IllegalArgumentException is thrown."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_AUTHENTICATION_PROTOCOL_CONF	"camel.source.endpoint.authenticationProtocol"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_AUTHENTICATION_PROTOCOL_DOC	"Authentication protocol to use if security level is set to enable authentication The possible values are: MD5, SHA1 One of: [MD5] [SHA1]"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_BACKOFF_ERROR_THRESHOLD_CONF	"camel.source.endpoint.backoffErrorThreshold"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_BACKOFF_ERROR_THRESHOLD_DOC	"The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_BACKOFF_IDLE_THRESHOLD_CONF	"camel.source.endpoint.backoffIdleThreshold"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_BACKOFF_IDLE_THRESHOLD_DOC	"The number of subsequent idle polls that should happen before the backoffMultipler should kick-in."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_BACKOFF_MULTIPLIER_CONF	"camel.source.endpoint.backoffMultiplier"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_BACKOFF_MULTIPLIER_DOC	"To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_BRIDGE_ERROR_HANDLER_CONF	"camel.source.endpoint.bridgeErrorHandler"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_BRIDGE_ERROR_HANDLER_DOC	"Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_DELAY_CONF	"camel.source.endpoint.delay"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_DELAY_DOC	"Sets update rate in seconds"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_EXCEPTION_HANDLER_CONF	"camel.source.endpoint.exceptionHandler"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_EXCEPTION_HANDLER_DOC	"To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_EXCHANGE_PATTERN_CONF	"camel.source.endpoint.exchangePattern"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_EXCHANGE_PATTERN_DOC	"Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_GREEDY_CONF	"camel.source.endpoint.greedy"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_GREEDY_DOC	"If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_INITIAL_DELAY_CONF	"camel.source.endpoint.initialDelay"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_INITIAL_DELAY_DOC	"Milliseconds before the first poll starts."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_OIDS_CONF	"camel.source.endpoint.oids"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_OIDS_DOC	"Defines which values you are interested in. Please have a look at the Wikipedia to get a better understanding. You may provide a single OID or a coma separated list of OIDs. Example: oids=1.3.6.1.2.1.1.3.0,1.3.6.1.2.1.25.3.2.1.5.1,1.3.6.1.2.1.25.3.5.1.1.1,1.3.6.1.2.1.43.5.1.1.11.1"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_POLL_STRATEGY_CONF	"camel.source.endpoint.pollStrategy"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_POLL_STRATEGY_DOC	"A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_PRIVACY_PASSPHRASE_CONF	"camel.source.endpoint.privacyPassphrase"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_PRIVACY_PASSPHRASE_DOC	"The privacy passphrase. If not null, privacyProtocol must also be not null. RFC3414 11.2 requires passphrases to have a minimum length of 8 bytes. If the length of authenticationPassphrase is less than 8 bytes an IllegalArgumentException is thrown."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_PRIVACY_PROTOCOL_CONF	"camel.source.endpoint.privacyProtocol"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_PRIVACY_PROTOCOL_DOC	"The privacy protocol ID to be associated with this user. If set to null, this user only supports unencrypted messages."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_PROTOCOL_CONF	"camel.source.endpoint.protocol"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_PROTOCOL_DEFAULT	"udp"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_PROTOCOL_DOC	"Here you can select which protocol to use. You can use either udp or tcp. One of: [tcp] [udp]"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_REPEAT_COUNT_CONF	"camel.source.endpoint.repeatCount"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_REPEAT_COUNT_DOC	"Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_RETRIES_CONF	"camel.source.endpoint.retries"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_RETRIES_DOC	"Defines how often a retry is made before canceling the request."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_RUN_LOGGING_LEVEL_CONF	"camel.source.endpoint.runLoggingLevel"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_RUN_LOGGING_LEVEL_DEFAULT	"TRACE"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_RUN_LOGGING_LEVEL_DOC	"The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SCHEDULED_EXECUTOR_SERVICE_CONF	"camel.source.endpoint.scheduledExecutorService"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SCHEDULED_EXECUTOR_SERVICE_DOC	"Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SCHEDULER_CONF	"camel.source.endpoint.scheduler"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SCHEDULER_DEFAULT	"none"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SCHEDULER_DOC	"To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SCHEDULER_PROPERTIES_CONF	"camel.source.endpoint.schedulerProperties"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SCHEDULER_PROPERTIES_DOC	"To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SECURITY_LEVEL_CONF	"camel.source.endpoint.securityLevel"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SECURITY_LEVEL_DOC	"Sets the security level for this target. The supplied security level must be supported by the security model dependent information associated with the security name set for this target. The value 1 means: No authentication and no encryption. Anyone can create and read messages with this security level The value 2 means: Authentication and no encryption. Only the one with the right authentication key can create messages with this security level, but anyone can read the contents of the message. The value 3 means: Authentication and encryption. Only the one with the right authentication key can create messages with this security level, and only the one with the right encryption/decryption key can read the contents of the message. One of: [1] [2] [3]"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SECURITY_NAME_CONF	"camel.source.endpoint.securityName"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SECURITY_NAME_DOC	"Sets the security name to be used with this target."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SEND_EMPTY_MESSAGE_WHEN_IDLE_CONF	"camel.source.endpoint.sendEmptyMessageWhenIdle"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SEND_EMPTY_MESSAGE_WHEN_IDLE_DOC	"If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SNMP_COMMUNITY_CONF	"camel.source.endpoint.snmpCommunity"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SNMP_COMMUNITY_DEFAULT	"public"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SNMP_COMMUNITY_DOC	"Sets the community octet string for the snmp request."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SNMP_CONTEXT_ENGINE_ID_CONF	"camel.source.endpoint.snmpContextEngineId"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SNMP_CONTEXT_ENGINE_ID_DOC	"Sets the context engine ID field of the scoped PDU."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SNMP_CONTEXT_NAME_CONF	"camel.source.endpoint.snmpContextName"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SNMP_CONTEXT_NAME_DOC	"Sets the context name field of this scoped PDU."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SNMP_VERSION_CONF	"camel.source.endpoint.snmpVersion"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SNMP_VERSION_DOC	"Sets the snmp version for the request. The value 0 means SNMPv1, 1 means SNMPv2c, and the value 3 means SNMPv3 One of: [0] [1] [3]"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_START_SCHEDULER_CONF	"camel.source.endpoint.startScheduler"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_START_SCHEDULER_DOC	"Whether the scheduler should be auto started."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SYNCHRONOUS_CONF	"camel.source.endpoint.synchronous"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_SYNCHRONOUS_DOC	"Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported)."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_TIME_UNIT_CONF	"camel.source.endpoint.timeUnit"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_TIME_UNIT_DEFAULT	"MILLISECONDS"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_TIME_UNIT_DOC	"Time unit for initialDelay and delay options. One of: [NANOSECONDS] [MICROSECONDS] [MILLISECONDS] [SECONDS] [MINUTES] [HOURS] [DAYS]"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_TIMEOUT_CONF	"camel.source.endpoint.timeout"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_TIMEOUT_DOC	"Sets the timeout value for the request in millis."
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_TREE_LIST_CONF	"camel.source.endpoint.treeList"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_TREE_LIST_DOC	"Sets the flag whether the scoped PDU will be displayed as the list if it has child elements in its tree"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_TYPE_CONF	"camel.source.endpoint.type"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_TYPE_DOC	"Which operation to perform such as poll, trap, etc. One of: [TRAP] [POLL] [GET_NEXT]"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_USE_FIXED_DELAY_CONF	"camel.source.endpoint.useFixedDelay"
public static final String	CAMEL_SOURCE_SNMP_ENDPOINT_USE_FIXED_DELAY_DOC	"Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details."
public static final String	CAMEL_SOURCE_SNMP_PATH_HOST_CONF	"camel.source.path.host"
public static final String	CAMEL_SOURCE_SNMP_PATH_HOST_DOC	"Hostname of the SNMP enabled device"
public static final String	CAMEL_SOURCE_SNMP_PATH_PORT_CONF	"camel.source.path.port"
public static final String	CAMEL_SOURCE_SNMP_PATH_PORT_DOC	"Port number of the SNMP enabled device"