Constant Field Values

Contents

• org.apache.*

org.apache.*

org.apache.camel.kafkaconnector.ironmq.CamelIronmqSinkConnectorConfig

Modifier and Type	Constant Field	Value
public static final String	CAMEL_SINK_IRONMQ_COMPONENT_AUTOWIRED_ENABLED_CONF	"camel.component.ironmq.autowiredEnabled"
public static final String	CAMEL_SINK_IRONMQ_COMPONENT_AUTOWIRED_ENABLED_DOC	"Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc."
public static final String	CAMEL_SINK_IRONMQ_COMPONENT_LAZY_START_PRODUCER_CONF	"camel.component.ironmq.lazyStartProducer"
public static final String	CAMEL_SINK_IRONMQ_COMPONENT_LAZY_START_PRODUCER_DOC	"Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel\'s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing."
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_CLIENT_CONF	"camel.sink.endpoint.client"
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_CLIENT_DOC	"Reference to a io.iron.ironmq.Client in the Registry."
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_IRON_MQCLOUD_CONF	"camel.sink.endpoint.ironMQCloud"
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_IRON_MQCLOUD_DEFAULT	"https://mq-aws-us-east-1-1.iron.io"
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_IRON_MQCLOUD_DOC	"IronMq Cloud url. Urls for public clusters: https://mq-aws-us-east-1-1.iron.io (US) and https://mq-aws-eu-west-1-1.iron.io (EU)"
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_LAZY_START_PRODUCER_CONF	"camel.sink.endpoint.lazyStartProducer"
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_LAZY_START_PRODUCER_DOC	"Whether the producer should be started lazy (on the first message). By starting lazy you can use this to allow CamelContext and routes to startup in situations where a producer may otherwise fail during starting and cause the route to fail being started. By deferring this startup to be lazy then the startup failure can be handled during routing messages via Camel\'s routing error handlers. Beware that when the first message is processed then creating and starting the producer may take a little time and prolong the total processing time of the processing."
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_PRESERVE_HEADERS_CONF	"camel.sink.endpoint.preserveHeaders"
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_PRESERVE_HEADERS_DOC	"Should message headers be preserved when publishing messages. This will add the Camel headers to the Iron MQ message as a json payload with a header list, and a message body. Useful when Camel is both consumer and producer."
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_PROJECT_ID_CONF	"camel.sink.endpoint.projectId"
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_PROJECT_ID_DOC	"IronMQ projectId"
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_TOKEN_CONF	"camel.sink.endpoint.token"
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_TOKEN_DOC	"IronMQ token"
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_VISIBILITY_DELAY_CONF	"camel.sink.endpoint.visibilityDelay"
public static final String	CAMEL_SINK_IRONMQ_ENDPOINT_VISIBILITY_DELAY_DOC	"The item will not be available on the queue until this many seconds have passed. Default is 0 seconds."
public static final String	CAMEL_SINK_IRONMQ_PATH_QUEUE_NAME_CONF	"camel.sink.path.queueName"
public static final String	CAMEL_SINK_IRONMQ_PATH_QUEUE_NAME_DOC	"The name of the IronMQ queue"

org.apache.camel.kafkaconnector.ironmq.CamelIronmqSourceConnectorConfig

Modifier and Type	Constant Field	Value
public static final String	CAMEL_SOURCE_IRONMQ_COMPONENT_AUTOWIRED_ENABLED_CONF	"camel.component.ironmq.autowiredEnabled"
public static final String	CAMEL_SOURCE_IRONMQ_COMPONENT_AUTOWIRED_ENABLED_DOC	"Whether autowiring is enabled. This is used for automatic autowiring options (the option must be marked as autowired) by looking up in the registry to find if there is a single instance of matching type, which then gets configured on the component. This can be used for automatic configuring JDBC data sources, JMS connection factories, AWS Clients, etc."
public static final String	CAMEL_SOURCE_IRONMQ_COMPONENT_BRIDGE_ERROR_HANDLER_CONF	"camel.component.ironmq.bridgeErrorHandler"
public static final String	CAMEL_SOURCE_IRONMQ_COMPONENT_BRIDGE_ERROR_HANDLER_DOC	"Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_BACKOFF_ERROR_THRESHOLD_CONF	"camel.source.endpoint.backoffErrorThreshold"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_BACKOFF_ERROR_THRESHOLD_DOC	"The number of subsequent error polls (failed due some error) that should happen before the backoffMultipler should kick-in."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_BACKOFF_IDLE_THRESHOLD_CONF	"camel.source.endpoint.backoffIdleThreshold"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_BACKOFF_IDLE_THRESHOLD_DOC	"The number of subsequent idle polls that should happen before the backoffMultipler should kick-in."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_BACKOFF_MULTIPLIER_CONF	"camel.source.endpoint.backoffMultiplier"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_BACKOFF_MULTIPLIER_DOC	"To let the scheduled polling consumer backoff if there has been a number of subsequent idles/errors in a row. The multiplier is then the number of polls that will be skipped before the next actual attempt is happening again. When this option is in use then backoffIdleThreshold and/or backoffErrorThreshold must also be configured."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_BATCH_DELETE_CONF	"camel.source.endpoint.batchDelete"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_BATCH_DELETE_DOC	"Should messages be deleted in one batch. This will limit the number of api requests since messages are deleted in one request, instead of one pr. exchange. If enabled care should be taken that the consumer is idempotent when processing exchanges."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_BRIDGE_ERROR_HANDLER_CONF	"camel.source.endpoint.bridgeErrorHandler"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_BRIDGE_ERROR_HANDLER_DOC	"Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_CLIENT_CONF	"camel.source.endpoint.client"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_CLIENT_DOC	"Reference to a io.iron.ironmq.Client in the Registry."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_CONCURRENT_CONSUMERS_CONF	"camel.source.endpoint.concurrentConsumers"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_CONCURRENT_CONSUMERS_DOC	"The number of concurrent consumers."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_DELAY_CONF	"camel.source.endpoint.delay"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_DELAY_DOC	"Milliseconds before the next poll."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_EXCEPTION_HANDLER_CONF	"camel.source.endpoint.exceptionHandler"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_EXCEPTION_HANDLER_DOC	"To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_EXCHANGE_PATTERN_CONF	"camel.source.endpoint.exchangePattern"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_EXCHANGE_PATTERN_DOC	"Sets the exchange pattern when the consumer creates an exchange. One of: [InOnly] [InOut] [InOptionalOut]"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_GREEDY_CONF	"camel.source.endpoint.greedy"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_GREEDY_DOC	"If greedy is enabled, then the ScheduledPollConsumer will run immediately again, if the previous run polled 1 or more messages."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_INITIAL_DELAY_CONF	"camel.source.endpoint.initialDelay"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_INITIAL_DELAY_DOC	"Milliseconds before the first poll starts."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_IRON_MQCLOUD_CONF	"camel.source.endpoint.ironMQCloud"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_IRON_MQCLOUD_DEFAULT	"https://mq-aws-us-east-1-1.iron.io"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_IRON_MQCLOUD_DOC	"IronMq Cloud url. Urls for public clusters: https://mq-aws-us-east-1-1.iron.io (US) and https://mq-aws-eu-west-1-1.iron.io (EU)"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_MAX_MESSAGES_PER_POLL_CONF	"camel.source.endpoint.maxMessagesPerPoll"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_MAX_MESSAGES_PER_POLL_DOC	"Number of messages to poll pr. call. Maximum is 100."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_POLL_STRATEGY_CONF	"camel.source.endpoint.pollStrategy"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_POLL_STRATEGY_DOC	"A pluggable org.apache.camel.PollingConsumerPollingStrategy allowing you to provide your custom implementation to control error handling usually occurred during the poll operation before an Exchange have been created and being routed in Camel."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_PRESERVE_HEADERS_CONF	"camel.source.endpoint.preserveHeaders"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_PRESERVE_HEADERS_DOC	"Should message headers be preserved when publishing messages. This will add the Camel headers to the Iron MQ message as a json payload with a header list, and a message body. Useful when Camel is both consumer and producer."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_PROJECT_ID_CONF	"camel.source.endpoint.projectId"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_PROJECT_ID_DOC	"IronMQ projectId"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_REPEAT_COUNT_CONF	"camel.source.endpoint.repeatCount"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_REPEAT_COUNT_DOC	"Specifies a maximum limit of number of fires. So if you set it to 1, the scheduler will only fire once. If you set it to 5, it will only fire five times. A value of zero or negative means fire forever."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_RUN_LOGGING_LEVEL_CONF	"camel.source.endpoint.runLoggingLevel"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_RUN_LOGGING_LEVEL_DEFAULT	"TRACE"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_RUN_LOGGING_LEVEL_DOC	"The consumer logs a start/complete log line when it polls. This option allows you to configure the logging level for that. One of: [TRACE] [DEBUG] [INFO] [WARN] [ERROR] [OFF]"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_SCHEDULED_EXECUTOR_SERVICE_CONF	"camel.source.endpoint.scheduledExecutorService"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_SCHEDULED_EXECUTOR_SERVICE_DOC	"Allows for configuring a custom/shared thread pool to use for the consumer. By default each consumer has its own single threaded thread pool."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_SCHEDULER_CONF	"camel.source.endpoint.scheduler"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_SCHEDULER_DEFAULT	"none"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_SCHEDULER_DOC	"To use a cron scheduler from either camel-spring or camel-quartz component. Use value spring or quartz for built in scheduler"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_SCHEDULER_PROPERTIES_CONF	"camel.source.endpoint.schedulerProperties"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_SCHEDULER_PROPERTIES_DOC	"To configure additional properties when using a custom scheduler or any of the Quartz, Spring based scheduler."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_SEND_EMPTY_MESSAGE_WHEN_IDLE_CONF	"camel.source.endpoint.sendEmptyMessageWhenIdle"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_SEND_EMPTY_MESSAGE_WHEN_IDLE_DOC	"If the polling consumer did not poll any files, you can enable this option to send an empty message (no body) instead."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_START_SCHEDULER_CONF	"camel.source.endpoint.startScheduler"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_START_SCHEDULER_DOC	"Whether the scheduler should be auto started."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_TIME_UNIT_CONF	"camel.source.endpoint.timeUnit"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_TIME_UNIT_DEFAULT	"MILLISECONDS"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_TIME_UNIT_DOC	"Time unit for initialDelay and delay options. One of: [NANOSECONDS] [MICROSECONDS] [MILLISECONDS] [SECONDS] [MINUTES] [HOURS] [DAYS]"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_TIMEOUT_CONF	"camel.source.endpoint.timeout"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_TIMEOUT_DOC	"After timeout (in seconds), item will be placed back onto the queue."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_TOKEN_CONF	"camel.source.endpoint.token"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_TOKEN_DOC	"IronMQ token"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_USE_FIXED_DELAY_CONF	"camel.source.endpoint.useFixedDelay"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_USE_FIXED_DELAY_DOC	"Controls if fixed delay or fixed rate is used. See ScheduledExecutorService in JDK for details."
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_WAIT_CONF	"camel.source.endpoint.wait"
public static final String	CAMEL_SOURCE_IRONMQ_ENDPOINT_WAIT_DOC	"Time in seconds to wait for a message to become available. This enables long polling. Default is 0 (does not wait), maximum is 30."
public static final String	CAMEL_SOURCE_IRONMQ_PATH_QUEUE_NAME_CONF	"camel.source.path.queueName"
public static final String	CAMEL_SOURCE_IRONMQ_PATH_QUEUE_NAME_DOC	"The name of the IronMQ queue"