CC (springx-boot-gui-miglayout 0.0.1-RELEASE API)

java.lang.Object
- net.miginfocom.layout.CC

所有已实现的接口:

Externalizable, Serializable
```
public final class CC
extends Object
implements Externalizable
```
A simple value holder for one component's constraint.

另请参阅:

序列化表格

构造器概要

构造器
构造器和说明

CC()
Empty constructor.

构造器
构造器和说明
`CC()` Empty constructor.

方法概要

所有方法实例方法具体方法已过时的方法
限定符和类型	方法和说明
`CC`	`alignX(String align)` Same functionality as `getHorizontal().setAlign(ConstraintParser.parseUnitValue(unitValue, true))` only this method returns `this` for chaining multiple calls.
`CC`	`alignY(String align)` Same functionality as `getVertical().setAlign(ConstraintParser.parseUnitValue(unitValue, true))` only this method returns `this` for chaining multiple calls.
`CC`	`cell(int... colRowWidthHeight)` Set the cell(s) that the component should occupy in the grid.
`CC`	`dockEast()` Same functionality as calling `setDockSide(int)` with `3` only this method returns `this` for chaining multiple calls.
`CC`	`dockNorth()` Same functionality as calling `setDockSide(int)` with `0` only this method returns `this` for chaining multiple calls.
`CC`	`dockSouth()` Same functionality as calling `setDockSide(int)` with `2` only this method returns `this` for chaining multiple calls.
`CC`	`dockWest()` Same functionality as calling `setDockSide(int)` with `1` only this method returns `this` for chaining multiple calls.
`CC`	`endGroup(String... xy)` The end group(s) that this component should be placed in.
`CC`	`endGroupX(String s)` Specifies that the component should be put in the end group `s` and will thus share the same ending coordinate as them within the group.
`CC`	`endGroupY(String s)` The end group that this component should be placed in.
`CC`	`external()` Same functionality as calling `setExternal(boolean)` with `true` only this method returns `this` for chaining multiple calls.
`CC`	`flowX()` Same functionality as calling `setFlowX(Boolean)` with `Boolean.TRUE` only this method returns `this` for chaining multiple calls.
`CC`	`flowY()` Same functionality as calling `setFlowX(Boolean)` with `Boolean.FALSE` only this method returns `this` for chaining multiple calls.
`CC`	`gap(String... args)` Corresponds exactly to the "gap left right top bottom" keyword.
`CC`	`gapAfter(String boundsSize)` Sets the horizontal gap after the component.
`CC`	`gapBefore(String boundsSize)` Sets the horizontal gap before the component.
`CC`	`gapBottom(String boundsSize)` Sets the gap below the component.
`CC`	`gapLeft(String boundsSize)` Sets the gap to the left the component.
`CC`	`gapRight(String boundsSize)` Sets the gap to the right of the component.
`CC`	`gapTop(String boundsSize)` Sets the gap above the component.
`CC`	`gapX(String before, String after)` The horizontal gap before and/or after the component.
`CC`	`gapY(String before, String after)` The vertical gap before (normally above) and/or after (normally below) the component.
`AnimSpec`	`getAnimSpec()` Returns the animation spec.
`int`	`getCellX()` Returns the absolute cell position in the grid or `-1` if cell positioning is not used.
`int`	`getCellY()` Returns the absolute cell position in the grid or `-1` if cell positioning is not used.
`DimConstraint`	`getDimConstraint(boolean isHor)` Returns the vertical or horizontal dim constraint.
`int`	`getDockSide()` Sets the docking side. -1 means no docking.
`Boolean`	`getFlowX()` Returns if the flow in the cell is in the horizontal dimension.
`int`	`getHideMode()` Sets how a component that is hidden (not visible) should be treated by default.
`DimConstraint`	`getHorizontal()` Returns the horizontal dimension constraint for this component constraint.
`String`	`getId()` Returns the id used to reference this component in some constraints.
`BoundSize`	`getNewlineGapSize()` Returns the newline size if it is a custom size.
`UnitValue[]`	`getPadding()` Returns the absolute resizing in the last stage of the layout cycle.
`UnitValue[]`	`getPos()` Returns the absolute positioning of one or more of the edges.
`Float`	`getPushX()` "pushx" indicates that the column that this component is in (this first if the component spans) should default to growing.
`Float`	`getPushY()` "pushx" indicates that the row that this component is in (this first if the component spans) should default to growing.
`int`	`getSkip()` Returns how many cells in the grid that should be skipped before the component that this constraint belongs to.
`int`	`getSpanX()` Returns the number of cells the cell that this constraint's component will span in the indicated dimension.
`int`	`getSpanY()` Returns the number of cells the cell that this constraint's component will span in the indicated dimension.
`int`	`getSplit()` Returns in how many parts the current cell (that this constraint's component will be in) should be split in.
`String`	`getTag()` Tags the component with metadata.
`DimConstraint`	`getVertical()` Returns the vertical dimension constraint for this component constraint.
`UnitValue[]`	`getVisualPadding()` Returns the visual padding used when laying out this Component.
`BoundSize`	`getWrapGapSize()` Returns the wrap size if it is a custom size.
`CC`	`grow()` Same functionality as `growX()` and `growY()`.
`CC`	`grow(float... widthHeight)` grow weight for the component horizontally and optionally vertically.
`CC`	`growPrio(int... widthHeight)` Grow priority for the component horizontally and optionally vertically.
`CC`	`growPrioX(int p)` The grow priority compared to other components in the same cell.
`CC`	`growPrioY(int p)` The grow priority compared to other components in the same cell.
`CC`	`growX()` Grow weight for the component horizontally.
`CC`	`growX(float w)` Grow weight for the component horizontally.
`CC`	`growY()` Grow weight for the component vertically.
`CC`	`growY(float w)` Grow weight for the component vertically.
`CC`	`growY(Float w)` 已过时。
`CC`	`height(String size)` The size for the component as a min and/or preferred and/or maximum size.
`CC`	`hideMode(int mode)` How this component, if hidden (not visible), should be treated.
`CC`	`id(String s)` The id used to reference this component in some constraints.
`boolean`	`isBoundsInGrid()` Returns if the absolute `pos` value should be corrections to the component that is in a normal cell.
`boolean`	`isExternal()` Returns if this component should have its bounds handled by an external source and not this layout manager.
`boolean`	`isNewline()` Returns if the flow should wrap to the next line/column before the component that this constraint belongs to.
`boolean`	`isWrap()` Returns if the flow should wrap to the next line/column after the component that this constraint belongs to.
`CC`	`maxHeight(String size)` The maximum size for the component.
`CC`	`maxWidth(String size)` The maximum size for the component.
`CC`	`minHeight(String size)` The minimum size for the component.
`CC`	`minWidth(String size)` The minimum size for the component.
`CC`	`newline()` Same functionality as calling `setNewline(boolean)` with `true` only this method returns `this` for chaining multiple calls.
`CC`	`newline(String gapSize)` Same functionality as `setNewlineGapSize(BoundSize)` only this method returns `this` for chaining multiple calls.
`CC`	`pad(int top, int left, int bottom, int right)` Same functionality as `setPadding(UnitValue[])` but the unit values as absolute pixels.
`CC`	`pad(String pad)` Same functionality as `setPadding(ConstraintParser.parseInsets(pad, false))}` only this method returns `this` for chaining multiple calls.
`CC`	`pos(String x, String y)` Same functionality as `x(String x)` and `y(String y)` together.
`CC`	`pos(String x, String y, String x2, String y2)` Same functionality as `x(String x)`, `y(String y)`, `y2(String y)` and `y2(String y)` together.
`CC`	`push()` Same functionality as `pushX().pushY()` which means this cell will push in both x and y dimensions.
`CC`	`push(Float weightX, Float weightY)` Same functionality as `pushX(weightX).pushY(weightY)` which means this cell will push in both x and y dimensions.
`CC`	`pushX()` Same functionality as `setPushX(Float)` which means this cell will push the rest of the row.
`CC`	`pushX(Float weight)` Same functionality as `setPushX(Float weight)` only this method returns `this` for chaining multiple calls.
`CC`	`pushY()` Same functionality as `setPushY(Float)` which means this cell will push the rest of the column.
`CC`	`pushY(Float weight)` Same functionality as `setPushY(Float weight)` only this method returns `this` for chaining multiple calls.
`void`	`readExternal(ObjectInput in)`
`void`	`setCellX(int x)` Set an absolute cell x-position in the grid.
`void`	`setCellY(int y)` Set an absolute cell x-position in the grid.
`void`	`setDockSide(int side)` Sets the docking side. -1 means no docking.
`void`	`setExternal(boolean b)` If this boolean is true this component is not handled in any way by the layout manager and the component can have its bounds set by an external handler which is normally by the use of some `component.setBounds(x, y, width, height)` directly (for Swing).
`void`	`setFlowX(Boolean b)` Sets if the flow in the cell is in the horizontal dimension.
`void`	`setHideMode(int mode)` Sets how a component that is hidden (not visible) should be treated by default.
`void`	`setHorizontal(DimConstraint h)` Sets the horizontal dimension constraint for this component constraint.
`void`	`setId(String id)` Sets the id used to reference this component in some constraints.
`void`	`setNewline(boolean b)` Sets if the flow should wrap to the next line/column before the component that this constraint belongs to.
`void`	`setNewlineGapSize(BoundSize s)` Set the newline size and turns newline on if `!`
`void`	`setPadding(UnitValue[] sides)` Sets the absolute resizing in the last stage of the layout cycle.
`void`	`setPos(UnitValue[] pos)` Sets absolute positioning of one or more of the edges.
`void`	`setPushX(Float weight)` "pushx" indicates that the column that this component is in (this first if the component spans) should default to growing.
`void`	`setPushY(Float weight)` "pushx" indicates that the row that this component is in (this first if the component spans) should default to growing.
`void`	`setSkip(int cells)` Sets how many cells in the grid that should be skipped before the component that this constraint belongs to.
`void`	`setSpanX(int cells)` Sets the number of cells the cell that this constraint's component will span in the indicated dimension.
`void`	`setSpanY(int cells)` Sets the number of cells the cell that this constraint's component will span in the indicated dimension.
`void`	`setSplit(int parts)` Sets in how many parts the current cell (that this constraint's component will be in) should be split in.
`void`	`setTag(String tag)` Optional tag that gives more context to this constraint's component.
`void`	`setVertical(DimConstraint v)` Sets the vertical dimension constraint for this component constraint.
`void`	`setVisualPadding(UnitValue[] sides)` Sets the visual padding used when laying out this Component.
`void`	`setWrap(boolean b)` Sets if the flow should wrap to the next line/column after the component that this constraint belongs to.
`void`	`setWrapGapSize(BoundSize s)` Set the wrap size and turns wrap on if `!`
`CC`	`shrink(float... widthHeight)` Shrink weight for the component horizontally and optionally vertically.
`CC`	`shrinkPrio(int... widthHeight)` Shrink priority for the component horizontally and optionally vertically.
`CC`	`shrinkPrioX(int p)` The shrink priority compared to other components in the same cell.
`CC`	`shrinkPrioY(int p)` The shrink priority compared to other components in the same cell.
`CC`	`shrinkX(float w)` Shrink weight for the component horizontally.
`CC`	`shrinkY(float w)` Shrink weight for the component horizontally.
`CC`	`sizeGroup(String... xy)` The size group(s) that this component should be placed in.
`CC`	`sizeGroupX(String s)` Specifies that the component should be put in the size group `s` and will thus share the same size as them within the group.
`CC`	`sizeGroupY(String s)` The size group that this component should be placed in.
`CC`	`skip()` Same functionality as skip(1).
`CC`	`skip(int cells)` Same functionality as `setSkip(int)` only this method returns `this` for chaining multiple calls.
`CC`	`span(int... cells)` Same functionality as `spanX(cellsX).spanY(cellsY)` which means this cell will span cells in both x and y.
`CC`	`spanX()` Same functionality as `setSpanX(int)` which means this cell will span the rest of the row.
`CC`	`spanX(int cells)` Same functionality as `setSpanX(int)` only this method returns `this` for chaining multiple calls.
`CC`	`spanY()` Same functionality as calling `setSpanY(int)` with `LayoutUtil.INF` which means this cell will span the rest of the column.
`CC`	`spanY(int cells)` Same functionality as `setSpanY(int)` only this method returns `this` for chaining multiple calls.
`CC`	`split()` Same functionality as split(LayoutUtil.INF), which means split until one of the keywords that breaks the split is found for a component after this one (e.g. wrap, newline and skip).
`CC`	`split(int parts)` Same functionality as `setSplit(int parts)` only this method returns `this` for chaining multiple calls.
`CC`	`tag(String tag)` Same functionality as `setTag(String tag)` only this method returns `this` for chaining multiple calls.
`CC`	`width(String size)` The size for the component as a min and/or preferred and/or maximum size.
`CC`	`wrap()` Same functionality as calling `setWrap(boolean)` with `true` only this method returns `this` for chaining multiple calls.
`CC`	`wrap(String gapSize)` Same functionality as `setWrapGapSize(BoundSize)` only this method returns `this` for chaining multiple calls.
`void`	`writeExternal(ObjectOutput out)`
`CC`	`x(String x)` Sets the x-coordinate for the component.
`CC`	`x2(String x2)` Sets the x2-coordinate for the component (right side).
`CC`	`y(String y)` Sets the y-coordinate for the component.
`CC`	`y2(String y2)` Sets the y2-coordinate for the component (bottom side).

从类继承的方法 java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- 构造器详细资料
  - CC
```
public CC()
```
    Empty constructor.
- 方法详细资料
  - endGroupX
```
public final CC endGroupX(String s)
```
    Specifies that the component should be put in the end group s and will thus share the same ending coordinate as them within the group.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    s - A name to associate on the group that should be the same for other rows/columns in the same group.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - sizeGroupX
```
public final CC sizeGroupX(String s)
```
    Specifies that the component should be put in the size group s and will thus share the same size as them within the group.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    s - A name to associate on the group that should be the same for other rows/columns in the same group.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - minWidth
```
public final CC minWidth(String size)
```
    The minimum size for the component. The value will override any value that is set on the component itself.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    size - The size expressed as a UnitValue. E.g. "100px" or "200mm".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - width
```
public final CC width(String size)
```
    The size for the component as a min and/or preferred and/or maximum size. The value will override any value that is set on the component itself.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    size - The size expressed as a BoundSize. E.g. "50:100px:200mm" or "100px".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - maxWidth
```
public final CC maxWidth(String size)
```
    The maximum size for the component. The value will override any value that is set on the component itself.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    size - The size expressed as a UnitValue. E.g. "100px" or "200mm".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - gapX
```
public final CC gapX(String before,
                     String after)
```
    The horizontal gap before and/or after the component. The gap is towards cell bounds and/or other component bounds.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    before - The size of the gap expressed as a BoundSize. E.g. "50:100px:200mm" or "100px!".
    
    after - The size of the gap expressed as a BoundSize. E.g. "50:100px:200mm" or "100px!".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - alignX
```
public final CC alignX(String align)
```
    Same functionality as getHorizontal().setAlign(ConstraintParser.parseUnitValue(unitValue, true)) only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    align - The align keyword or for instance "100px". E.g "left", "right", "leading" or "trailing".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - growPrioX
```
public final CC growPrioX(int p)
```
    The grow priority compared to other components in the same cell.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    p - The grow priority.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - growPrio
```
public final CC growPrio(int... widthHeight)
```
    Grow priority for the component horizontally and optionally vertically.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    widthHeight - The new shrink weight and height. 1-2 arguments, never null.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - growX
```
public final CC growX()
```
    Grow weight for the component horizontally. It default to weight 100.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    growX(float)
  - growX
```
public final CC growX(float w)
```
    Grow weight for the component horizontally.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    w - The new grow weight.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - grow
```
public final CC grow(float... widthHeight)
```
    grow weight for the component horizontally and optionally vertically.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    widthHeight - The new shrink weight and height. 1-2 arguments, never null.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - shrinkPrioX
```
public final CC shrinkPrioX(int p)
```
    The shrink priority compared to other components in the same cell.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    p - The shrink priority.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - shrinkPrio
```
public final CC shrinkPrio(int... widthHeight)
```
    Shrink priority for the component horizontally and optionally vertically.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    widthHeight - The new shrink weight and height. 1-2 arguments, never null.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - shrinkX
```
public final CC shrinkX(float w)
```
    Shrink weight for the component horizontally.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    w - The new shrink weight.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - shrink
```
public final CC shrink(float... widthHeight)
```
    Shrink weight for the component horizontally and optionally vertically.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    widthHeight - The new shrink weight and height. 1-2 arguments, never null.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - endGroupY
```
public final CC endGroupY(String s)
```
    The end group that this component should be placed in.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    s - The name of the group. If null that means no group (default)
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - endGroup
```
public final CC endGroup(String... xy)
```
    The end group(s) that this component should be placed in.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    xy - The end group for x and y respectively. 1-2 arguments, not null.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - sizeGroupY
```
public final CC sizeGroupY(String s)
```
    The size group that this component should be placed in.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    s - The name of the group. If null that means no group (default)
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - sizeGroup
```
public final CC sizeGroup(String... xy)
```
    The size group(s) that this component should be placed in.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    xy - The size group for x and y respectively. 1-2 arguments, not null.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - minHeight
```
public final CC minHeight(String size)
```
    The minimum size for the component. The value will override any value that is set on the component itself.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    size - The size expressed as a UnitValue. E.g. "100px" or "200mm".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - height
```
public final CC height(String size)
```
    The size for the component as a min and/or preferred and/or maximum size. The value will override any value that is set on the component itself.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    size - The size expressed as a BoundSize. E.g. "50:100px:200mm" or "100px".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - maxHeight
```
public final CC maxHeight(String size)
```
    The maximum size for the component. The value will override any value that is set on the component itself.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    size - The size expressed as a UnitValue. E.g. "100px" or "200mm".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - gapY
```
public final CC gapY(String before,
                     String after)
```
    The vertical gap before (normally above) and/or after (normally below) the component. The gap is towards cell bounds and/or other component bounds.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    before - The size of the gap expressed as a BoundSize. E.g. "50:100px:200mm" or "100px!".
    
    after - The size of the gap expressed as a BoundSize. E.g. "50:100px:200mm" or "100px!".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - alignY
```
public final CC alignY(String align)
```
    Same functionality as getVertical().setAlign(ConstraintParser.parseUnitValue(unitValue, true)) only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    align - The align keyword or for instance "100px". E.g "top" or "bottom".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - growPrioY
```
public final CC growPrioY(int p)
```
    The grow priority compared to other components in the same cell.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    p - The grow priority.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - growY
```
public final CC growY()
```
    Grow weight for the component vertically. Defaults to 100.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    growY(Float)
  - growY
```
public final CC growY(float w)
```
    Grow weight for the component vertically.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    w - The new grow weight.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - growY
```
@Deprecated
public final CC growY(Float w)
```
    已过时。
    
    Grow weight for the component vertically.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    w - The new grow weight.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - shrinkPrioY
```
public final CC shrinkPrioY(int p)
```
    The shrink priority compared to other components in the same cell.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    p - The shrink priority.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - shrinkY
```
public final CC shrinkY(float w)
```
    Shrink weight for the component horizontally.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    w - The new shrink weight.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - hideMode
```
public final CC hideMode(int mode)
```
    How this component, if hidden (not visible), should be treated.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    mode - The mode. Default to the mode in the LC. 0 == Normal. Bounds will be calculated as if the component was visible.
    1 == If hidden the size will be 0, 0 but the gaps remain.
    2 == If hidden the size will be 0, 0 and gaps set to zero.
    3 == If hidden the component will be disregarded completely and not take up a cell in the grid..
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - id
```
public final CC id(String s)
```
    The id used to reference this component in some constraints.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    s - The id or null. May consist of a groupID and an componentID which are separated by a dot: ".". E.g. "grp1.id1". The dot should never be first or last if present.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
  - tag
```
public final CC tag(String tag)
```
    Same functionality as setTag(String tag) only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    tag - The new tag. May be null.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setTag(String)
  - cell
```
public final CC cell(int... colRowWidthHeight)
```
    Set the cell(s) that the component should occupy in the grid. Same functionality as setCellX(int col) and setCellY(int row) together with setSpanX(int width) and setSpanY(int height). This method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    colRowWidthHeight - cellX, cellY, spanX, spanY respectively. 1-4 arguments, not null.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2. Replacing cell(int, int) and cell(int, int, int, int)
    
    另请参阅:
    
    setCellX(int), setCellY(int), setSpanX(int), setSpanY(int)
  - span
```
public final CC span(int... cells)
```
    Same functionality as spanX(cellsX).spanY(cellsY) which means this cell will span cells in both x and y. This method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com. Since 3.7.2 this takes an array/vararg whereas it previously only took two specific values, xSpan and ySpan.
    
    参数:
    
    cells - spanX and spanY, when present, and in that order.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2 Replaces span(int, int).
    
    另请参阅:
    
    setSpanY(int), setSpanX(int), spanY(), spanX()
  - gap
```
public final CC gap(String... args)
```
    Corresponds exactly to the "gap left right top bottom" keyword.
    
    参数:
    
    args - Same as for the "gap" keyword. Length 1-4, never null buf elements can be null.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - gapBefore
```
public final CC gapBefore(String boundsSize)
```
    Sets the horizontal gap before the component.
    Note! This is currently same as gapLeft(). This might change in 4.x.
    
    参数:
    
    boundsSize - The size of the gap expressed as a BoundSize. E.g. "50:100px:200mm" or "100px!".
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - gapAfter
```
public final CC gapAfter(String boundsSize)
```
    Sets the horizontal gap after the component.
    Note! This is currently same as gapRight(). This might change in 4.x.
    
    参数:
    
    boundsSize - The size of the gap expressed as a BoundSize. E.g. "50:100px:200mm" or "100px!".
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - gapTop
```
public final CC gapTop(String boundsSize)
```
    Sets the gap above the component.
    
    参数:
    
    boundsSize - The size of the gap expressed as a BoundSize. E.g. "50:100px:200mm" or "100px!".
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - gapLeft
```
public final CC gapLeft(String boundsSize)
```
    Sets the gap to the left the component.
    
    参数:
    
    boundsSize - The size of the gap expressed as a BoundSize. E.g. "50:100px:200mm" or "100px!".
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - gapBottom
```
public final CC gapBottom(String boundsSize)
```
    Sets the gap below the component.
    
    参数:
    
    boundsSize - The size of the gap expressed as a BoundSize. E.g. "50:100px:200mm" or "100px!".
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - gapRight
```
public final CC gapRight(String boundsSize)
```
    Sets the gap to the right of the component.
    
    参数:
    
    boundsSize - The size of the gap expressed as a BoundSize. E.g. "50:100px:200mm" or "100px!".
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
  - spanY
```
public final CC spanY()
```
    Same functionality as calling setSpanY(int) with LayoutUtil.INF which means this cell will span the rest of the column. This method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setSpanY(int), spanY()
  - spanY
```
public final CC spanY(int cells)
```
    Same functionality as setSpanY(int) only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    cells - The number of cells to span (i.e. merge).
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setSpanY(int)
  - spanX
```
public final CC spanX()
```
    Same functionality as setSpanX(int) which means this cell will span the rest of the row. This method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setSpanX(int), spanX()
  - spanX
```
public final CC spanX(int cells)
```
    Same functionality as setSpanX(int) only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    cells - The number of cells to span (i.e. merge).
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setSpanY(int)
  - push
```
public final CC push()
```
    Same functionality as pushX().pushY() which means this cell will push in both x and y dimensions. This method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPushX(Float), setPushX(Float), pushY(), pushX()
  - push
```
public final CC push(Float weightX,
                     Float weightY)
```
    Same functionality as pushX(weightX).pushY(weightY) which means this cell will push in both x and y dimensions. This method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    weightX - The weight used in the push.
    
    weightY - The weight used in the push.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPushY(Float), setPushX(Float), pushY(), pushX()
  - pushY
```
public final CC pushY()
```
    Same functionality as setPushY(Float) which means this cell will push the rest of the column. This method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPushY(Float)
  - pushY
```
public final CC pushY(Float weight)
```
    Same functionality as setPushY(Float weight) only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    weight - The weight used in the push.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPushY(Float)
  - pushX
```
public final CC pushX()
```
    Same functionality as setPushX(Float) which means this cell will push the rest of the row. This method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPushX(Float)
  - pushX
```
public final CC pushX(Float weight)
```
    Same functionality as setPushX(Float weight) only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    weight - The weight used in the push.
    
    返回:
    
    this so it is possible to chain calls. E.g. new LayoutConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPushY(Float)
  - split
```
public final CC split(int parts)
```
    Same functionality as setSplit(int parts) only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    parts - The number of parts (i.e. component slots) the cell should be divided into.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setSplit(int)
  - split
```
public final CC split()
```
    Same functionality as split(LayoutUtil.INF), which means split until one of the keywords that breaks the split is found for a component after this one (e.g. wrap, newline and skip).
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
    
    另请参阅:
    
    setSplit(int)
  - skip
```
public final CC skip(int cells)
```
    Same functionality as setSkip(int) only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    cells - How many cells in the grid that should be skipped before the component that this constraint belongs to
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setSkip(int)
  - skip
```
public final CC skip()
```
    Same functionality as skip(1).
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    从以下版本开始:
    
    3.7.2
    
    另请参阅:
    
    setSkip(int)
  - external
```
public final CC external()
```
    Same functionality as calling setExternal(boolean) with true only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setExternal(boolean)
  - flowX
```
public final CC flowX()
```
    Same functionality as calling setFlowX(Boolean) with Boolean.TRUE only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setFlowX(Boolean)
  - flowY
```
public final CC flowY()
```
    Same functionality as calling setFlowX(Boolean) with Boolean.FALSE only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setFlowX(Boolean)
  - grow
```
public final CC grow()
```
    Same functionality as growX() and growY().
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    growX(), growY()
  - newline
```
public final CC newline()
```
    Same functionality as calling setNewline(boolean) with true only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setNewline(boolean)
  - newline
```
public final CC newline(String gapSize)
```
    Same functionality as setNewlineGapSize(BoundSize) only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    gapSize - The gap size that will override the gap size in the row/column constraints if != null. E.g. "5px" or "unrel". If null or "" the newline size will be set to the default size and turned on. This is different compared to setNewlineGapSize(BoundSize).
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setNewlineGapSize(BoundSize)
  - wrap
```
public final CC wrap()
```
    Same functionality as calling setWrap(boolean) with true only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setWrap(boolean)
  - wrap
```
public final CC wrap(String gapSize)
```
    Same functionality as setWrapGapSize(BoundSize) only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    gapSize - The gap size that will override the gap size in the row/column constraints if != null. E.g. "5px" or "unrel". If null or "" the wrap size will be set to the default size and turned on. This is different compared to setWrapGapSize(BoundSize).
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setWrapGapSize(BoundSize)
  - dockNorth
```
public final CC dockNorth()
```
    Same functionality as calling setDockSide(int) with 0 only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setDockSide(int)
  - dockWest
```
public final CC dockWest()
```
    Same functionality as calling setDockSide(int) with 1 only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setDockSide(int)
  - dockSouth
```
public final CC dockSouth()
```
    Same functionality as calling setDockSide(int) with 2 only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setDockSide(int)
  - dockEast
```
public final CC dockEast()
```
    Same functionality as calling setDockSide(int) with 3 only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setDockSide(int)
  - x
```
public final CC x(String x)
```
    Sets the x-coordinate for the component. This is used to set the x coordinate position to a specific value. The component bounds is still precalculated to the grid cell and this method should be seen as a way to correct the x position.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    x - The x position as a UnitValue. E.g. "10" or "40mm" or "container.x+10".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPos(UnitValue[]), setBoundsInGrid(boolean)
  - y
```
public final CC y(String y)
```
    Sets the y-coordinate for the component. This is used to set the y coordinate position to a specific value. The component bounds is still precalculated to the grid cell and this method should be seen as a way to correct the y position.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    y - The y position as a UnitValue. E.g. "10" or "40mm" or "container.x+10".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPos(UnitValue[]), setBoundsInGrid(boolean)
  - x2
```
public final CC x2(String x2)
```
    Sets the x2-coordinate for the component (right side). This is used to set the x2 coordinate position to a specific value. The component bounds is still precalculated to the grid cell and this method should be seen as a way to correct the x position.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    x2 - The x2 side's position as a UnitValue. E.g. "10" or "40mm" or "container.x2 - 10".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPos(UnitValue[]), setBoundsInGrid(boolean)
  - y2
```
public final CC y2(String y2)
```
    Sets the y2-coordinate for the component (bottom side). This is used to set the y2 coordinate position to a specific value. The component bounds is still precalculated to the grid cell and this method should be seen as a way to correct the y position.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    y2 - The y2 side's position as a UnitValue. E.g. "10" or "40mm" or "container.x2 - 10".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPos(UnitValue[]), setBoundsInGrid(boolean)
  - pos
```
public final CC pos(String x,
                    String y)
```
    Same functionality as x(String x) and y(String y) together.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    x - The x position as a UnitValue. E.g. "10" or "40mm" or "container.x+10".
    
    y - The y position as a UnitValue. E.g. "10" or "40mm" or "container.x+10".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPos(UnitValue[])
  - pos
```
public final CC pos(String x,
                    String y,
                    String x2,
                    String y2)
```
    Same functionality as x(String x), y(String y), y2(String y) and y2(String y) together.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    x - The x position as a UnitValue. E.g. "10" or "40mm" or "container.x+10".
    
    y - The y position as a UnitValue. E.g. "10" or "40mm" or "container.x+10".
    
    x2 - The x2 side's position as a UnitValue. E.g. "10" or "40mm" or "container.x2 - 10".
    
    y2 - The y2 side's position as a UnitValue. E.g. "10" or "40mm" or "container.x2 - 10".
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setPos(UnitValue[])
  - pad
```
public final CC pad(int top,
                    int left,
                    int bottom,
                    int right)
```
    Same functionality as setPadding(UnitValue[]) but the unit values as absolute pixels. This method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    top - The top padding that will be added to the y coordinate at the last stage in the layout.
    
    left - The top padding that will be added to the x coordinate at the last stage in the layout.
    
    bottom - The top padding that will be added to the y2 coordinate at the last stage in the layout.
    
    right - The top padding that will be added to the x2 coordinate at the last stage in the layout.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setTag(String)
  - pad
```
public final CC pad(String pad)
```
    Same functionality as setPadding(ConstraintParser.parseInsets(pad, false))} only this method returns this for chaining multiple calls.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    pad - The string to parse. E.g. "10 10 10 10" or "20". If less than 4 groups the last will be used for the missing.
    
    返回:
    
    this so it is possible to chain calls. E.g. new ComponentConstraint().noGrid().gap().fill().
    
    另请参阅:
    
    setTag(String)
  - getHorizontal
```
public DimConstraint getHorizontal()
```
    Returns the horizontal dimension constraint for this component constraint. It has constraints for the horizontal size and grow/shrink priorities and weights.
    Note! If any changes is to be made it must be made direct when the object is returned. It is not allowed to save the constraint for later use.
    
    返回:
    
    The current dimension constraint. Never null.
  - setHorizontal
```
public void setHorizontal(DimConstraint h)
```
    Sets the horizontal dimension constraint for this component constraint. It has constraints for the horizontal size and grow/shrink priorities and weights.
    
    参数:
    
    h - The new dimension constraint. If null it will be reset to new DimConstraint();
  - getVertical
```
public DimConstraint getVertical()
```
    Returns the vertical dimension constraint for this component constraint. It has constraints for the vertical size and grow/shrink priorities and weights.
    Note! If any changes is to be made it must be made direct when the object is returned. It is not allowed to save the constraint for later use.
    
    返回:
    
    The current dimension constraint. Never null.
  - setVertical
```
public void setVertical(DimConstraint v)
```
    Sets the vertical dimension constraint for this component constraint. It has constraints for the vertical size and grow/shrink priorities and weights.
    
    参数:
    
    v - The new dimension constraint. If null it will be reset to new DimConstraint();
  - getDimConstraint
```
public DimConstraint getDimConstraint(boolean isHor)
```
    Returns the vertical or horizontal dim constraint.
    Note! If any changes is to be made it must be made direct when the object is returned. It is not allowed to save the constraint for later use.
    
    参数:
    
    isHor - If the horizontal constraint should be returned.
    
    返回:
    
    The dim constraint. Never null.
  - getPos
```
public UnitValue[] getPos()
```
    Returns the absolute positioning of one or more of the edges. This will be applied last in the layout cycle and will not affect the flow or grid positions. The positioning is relative to the parent and can not (as padding) be used to adjust the edges relative to the old value. May be null and elements may be null. null value(s) for the x2 and y2 will be interpreted as to keep the preferred size and thus the x1 and x2 will just absolutely positions the component.
    Note that setBoundsInGrid(boolean) changes the interpretation of this property slightly.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value as a new array, free to modify.
  - setPos
```
public void setPos(UnitValue[] pos)
```
    Sets absolute positioning of one or more of the edges. This will be applied last in the layout cycle and will not affect the flow or grid positions. The positioning is relative to the parent and can not (as padding) be used to adjust the edges relative to the old value. May be null and elements may be null. null value(s) for the x2 and y2 will be interpreted as to keep the preferred size and thus the x1 and x2 will just absolutely positions the component.
    Note that setBoundsInGrid(boolean) changes the interpretation of this property slightly.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    pos - UnitValue[] {x, y, x2, y2}. Must be null or of length 4. Elements can be null.
  - isBoundsInGrid
```
public boolean isBoundsInGrid()
```
    Returns if the absolute pos value should be corrections to the component that is in a normal cell. If false the value of pos is truly absolute in that it will not affect the grid or have a default bounds in the grid.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value.
    
    另请参阅:
    
    getPos()
  - getCellX
```
public int getCellX()
```
    Returns the absolute cell position in the grid or -1 if cell positioning is not used.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value.
  - setCellX
```
public void setCellX(int x)
```
    Set an absolute cell x-position in the grid. If >= 0 this point points to the absolute cell that this constaint's component should occupy. If there's already a component in that cell they will split the cell. The flow will then continue after this cell.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    x - The x-position or -1 to disable cell positioning.
  - getCellY
```
public int getCellY()
```
    Returns the absolute cell position in the grid or -1 if cell positioning is not used.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value.
  - setCellY
```
public void setCellY(int y)
```
    Set an absolute cell x-position in the grid. If >= 0 this point points to the absolute cell that this constaint's component should occupy. If there's already a component in that cell they will split the cell. The flow will then continue after this cell.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    y - The y-position or -1 to disable cell positioning.
  - getDockSide
```
public int getDockSide()
```
    Sets the docking side. -1 means no docking.
    Valid sides are: north = 0, west = 1, south = 2, east = 3.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current side.
  - setDockSide
```
public void setDockSide(int side)
```
    Sets the docking side. -1 means no docking.
    Valid sides are: north = 0, west = 1, south = 2, east = 3.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    side - -1 or 0-3.
  - isExternal
```
public boolean isExternal()
```
    Returns if this component should have its bounds handled by an external source and not this layout manager.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value.
  - setExternal
```
public void setExternal(boolean b)
```
    If this boolean is true this component is not handled in any way by the layout manager and the component can have its bounds set by an external handler which is normally by the use of some component.setBounds(x, y, width, height) directly (for Swing).
    The bounds will not affect the minimum and preferred size of the container.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    b - true means that the bounds are not changed.
  - getFlowX
```
public Boolean getFlowX()
```
    Returns if the flow in the cell is in the horizontal dimension. Vertical if false. Only the first component is a cell can set the flow.
    If null the flow direction is inherited by from the LC.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value.
  - setFlowX
```
public void setFlowX(Boolean b)
```
    Sets if the flow in the cell is in the horizontal dimension. Vertical if false. Only the first component is a cell can set the flow.
    If null the flow direction is inherited by from the LC.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    b - Boolean.TRUE means horizontal flow in the cell.
  - getHideMode
```
public int getHideMode()
```
    Sets how a component that is hidden (not visible) should be treated by default. For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The mode:
    0 == Normal. Bounds will be calculated as if the component was visible.
    1 == If hidden the size will be 0, 0 but the gaps remain.
    2 == If hidden the size will be 0, 0 and gaps set to zero.
    3 == If hidden the component will be disregarded completely and not take up a cell in the grid..
  - setHideMode
```
public void setHideMode(int mode)
```
    Sets how a component that is hidden (not visible) should be treated by default.
    
    参数:
    
    mode - The mode:
    0 == Normal. Bounds will be calculated as if the component was visible.
    1 == If hidden the size will be 0, 0 but the gaps remain.
    2 == If hidden the size will be 0, 0 and gaps set to zero.
    3 == If hidden the component will be disregarded completely and not take up a cell in the grid..
  - getId
```
public String getId()
```
    Returns the id used to reference this component in some constraints.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The id or null. May consist of a groupID and an componentID which are separated by a dot: ".". E.g. "grp1.id1". The dot should never be first or last if present.
  - setId
```
public void setId(String id)
```
    Sets the id used to reference this component in some constraints.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    id - The id or null. May consist of a groupID and an componentID which are separated by a dot: ".". E.g. "grp1.id1". The dot should never be first or last if present.
  - getPadding
```
public UnitValue[] getPadding()
```
    Returns the absolute resizing in the last stage of the layout cycle. May be null and elements may be null.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value. null or of length 4.
  - setPadding
```
public void setPadding(UnitValue[] sides)
```
    Sets the absolute resizing in the last stage of the layout cycle. These values are added to the edges and can thus for instance be used to grow or reduce the size or move the component an absolute number of pixels. May be null and elements may be null.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    sides - top, left, bottom right. Must be null or of length 4.
  - getVisualPadding
```
public UnitValue[] getVisualPadding()
```
    Returns the visual padding used when laying out this Component. May be null and elements may be null.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value. null or of length 4.
  - setVisualPadding
```
public void setVisualPadding(UnitValue[] sides)
```
    Sets the visual padding used when laying out this Component.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    sides - top, left, bottom right. Must be null or of length 4.
  - getSkip
```
public int getSkip()
```
    Returns how many cells in the grid that should be skipped before the component that this constraint belongs to.
    Note that only the first component will be checked for this property.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value. 0 if no skip.
  - setSkip
```
public void setSkip(int cells)
```
    Sets how many cells in the grid that should be skipped before the component that this constraint belongs to.
    Note that only the first component will be checked for this property.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    cells - How many cells in the grid that should be skipped before the component that this constraint belongs to
  - getSpanX
```
public int getSpanX()
```
    Returns the number of cells the cell that this constraint's component will span in the indicated dimension. 1 is default and means that it only spans the current cell. LayoutUtil.INF is used to indicate a span to the end of the column/row.
    Note that only the first component will be checked for this property.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value.
  - setSpanX
```
public void setSpanX(int cells)
```
    Sets the number of cells the cell that this constraint's component will span in the indicated dimension. 1 is default and means that it only spans the current cell. LayoutUtil.INF is used to indicate a span to the end of the column/row.
    Note that only the first component will be checked for this property.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    cells - The number of cells to span (i.e. merge).
  - getSpanY
```
public int getSpanY()
```
    Returns the number of cells the cell that this constraint's component will span in the indicated dimension. 1 is default and means that it only spans the current cell. LayoutUtil.INF is used to indicate a span to the end of the column/row.
    Note that only the first component will be checked for this property.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value.
  - setSpanY
```
public void setSpanY(int cells)
```
    Sets the number of cells the cell that this constraint's component will span in the indicated dimension. 1 is default and means that it only spans the current cell. LayoutUtil.INF is used to indicate a span to the end of the column/row.
    Note that only the first component will be checked for this property.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    cells - The number of cells to span (i.e. merge).
  - getPushX
```
public Float getPushX()
```
    "pushx" indicates that the column that this component is in (this first if the component spans) should default to growing. If any other column has been set to grow this push value on the component does nothing as the column's explicit grow weight will take precedence. Push is normally used when the grid has not been defined in the layout.
    If multiple components in a column has push weights set the largest one will be used for the column.
    
    返回:
    
    The current push value. Default is null.
  - setPushX
```
public void setPushX(Float weight)
```
    "pushx" indicates that the column that this component is in (this first if the component spans) should default to growing. If any other column has been set to grow this push value on the component does nothing as the column's explicit grow weight will take precedence. Push is normally used when the grid has not been defined in the layout.
    If multiple components in a column has push weights set the largest one will be used for the column.
    
    参数:
    
    weight - The new push value. Default is null.
  - getPushY
```
public Float getPushY()
```
    "pushx" indicates that the row that this component is in (this first if the component spans) should default to growing. If any other row has been set to grow this push value on the component does nothing as the row's explicit grow weight will take precedence. Push is normally used when the grid has not been defined in the layout.
    If multiple components in a row has push weights set the largest one will be used for the row.
    
    返回:
    
    The current push value. Default is null.
  - setPushY
```
public void setPushY(Float weight)
```
    "pushx" indicates that the row that this component is in (this first if the component spans) should default to growing. If any other row has been set to grow this push value on the component does nothing as the row's explicit grow weight will take precedence. Push is normally used when the grid has not been defined in the layout.
    If multiple components in a row has push weights set the largest one will be used for the row.
    
    参数:
    
    weight - The new push value. Default is null.
  - getSplit
```
public int getSplit()
```
    Returns in how many parts the current cell (that this constraint's component will be in) should be split in. If for instance it is split in two, the next component will also share the same cell. Note that the cell can also span a number of cells, which means that you can for instance span three cells and split that big cell for two components. Split can be set to a very high value to make all components in the same row/column share the same cell (e.g. LayoutUtil.INF).
    Note that only the first component will be checked for this property.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value.
  - setSplit
```
public void setSplit(int parts)
```
    Sets in how many parts the current cell (that this constraint's component will be in) should be split in. If for instance it is split in two, the next component will also share the same cell. Note that the cell can also span a number of cells, which means that you can for instance span three cells and split that big cell for two components. Split can be set to a very high value to make all components in the same row/column share the same cell (e.g. LayoutUtil.INF).
    Note that only the first component will be checked for this property.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    parts - The number of parts (i.e. component slots) the cell should be divided into.
  - getTag
```
public String getTag()
```
    Tags the component with metadata. Currently only used to tag buttons with for instance "cancel" or "ok" to make them show up in the correct order depending on platform. See PlatformDefaults.setButtonOrder(String) for information.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value. May be null.
  - setTag
```
public void setTag(String tag)
```
    Optional tag that gives more context to this constraint's component. It is for instance used to tag buttons in a button bar with the button type such as "ok", "help" or "cancel".
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    tag - The new tag. May be null.
  - isWrap
```
public boolean isWrap()
```
    Returns if the flow should wrap to the next line/column after the component that this constraint belongs to.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value.
  - setWrap
```
public void setWrap(boolean b)
```
    Sets if the flow should wrap to the next line/column after the component that this constraint belongs to.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    b - true means wrap after.
  - getWrapGapSize
```
public BoundSize getWrapGapSize()
```
    Returns the wrap size if it is a custom size. If wrap was set to true with setWrap(boolean) then this method will return null since that means that the gap size should be the default one as defined in the rows spec.
    
    返回:
    
    The custom gap size. NOTE! Will return null for both no wrap and default wrap.
    
    从以下版本开始:
    
    2.4.2
    
    另请参阅:
    
    isWrap(), setWrap(boolean)
  - setWrapGapSize
```
public void setWrapGapSize(BoundSize s)
```
    Set the wrap size and turns wrap on if != null.
    
    参数:
    
    s - The custom gap size. NOTE! null will not turn on or off wrap, it will only set the wrap gap size to "default". A non-null value will turn on wrap though.
    
    从以下版本开始:
    
    2.4.2
    
    另请参阅:
    
    isWrap(), setWrap(boolean)
  - isNewline
```
public boolean isNewline()
```
    Returns if the flow should wrap to the next line/column before the component that this constraint belongs to.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    返回:
    
    The current value.
  - setNewline
```
public void setNewline(boolean b)
```
    Sets if the flow should wrap to the next line/column before the component that this constraint belongs to.
    For a more thorough explanation of what this constraint does see the white paper or cheat Sheet at www.migcomponents.com.
    
    参数:
    
    b - true means wrap before.
  - getNewlineGapSize
```
public BoundSize getNewlineGapSize()
```
    Returns the newline size if it is a custom size. If newline was set to true with setNewline(boolean) then this method will return null since that means that the gap size should be the default one as defined in the rows spec.
    
    返回:
    
    The custom gap size. NOTE! Will return null for both no newline and default newline.
    
    从以下版本开始:
    
    2.4.2
    
    另请参阅:
    
    isNewline(), setNewline(boolean)
  - setNewlineGapSize
```
public void setNewlineGapSize(BoundSize s)
```
    Set the newline size and turns newline on if != null.
    
    参数:
    
    s - The custom gap size. NOTE! null will not turn on or off newline, it will only set the newline gap size to "default". A non-null value will turn on newline though.
    
    从以下版本开始:
    
    2.4.2
    
    另请参阅:
    
    isNewline(), setNewline(boolean)
  - getAnimSpec
```
public AnimSpec getAnimSpec()
```
    Returns the animation spec. Default is a spec where animation is off (prio 0).
    
    返回:
    
    Never null.
  - readExternal
```
public void readExternal(ObjectInput in)
                  throws IOException,
                         ClassNotFoundException
```
    指定者:
    
    readExternal 在接口中 Externalizable
    
    抛出:
    
    IOException
    
    ClassNotFoundException
  - writeExternal
```
public void writeExternal(ObjectOutput out)
                   throws IOException
```
    指定者:
    
    writeExternal 在接口中 Externalizable
    
    抛出:
    
    IOException

类 CC

构造器概要

方法概要

从类继承的方法 java.lang.Object

构造器详细资料

CC

方法详细资料

endGroupX

sizeGroupX

minWidth

width

maxWidth

gapX

alignX

growPrioX

growPrio

growX

growX

grow

shrinkPrioX

shrinkPrio

shrinkX

shrink

endGroupY

endGroup

sizeGroupY

sizeGroup

minHeight

height

maxHeight

gapY

alignY

growPrioY

growY

growY

growY

shrinkPrioY

shrinkY

hideMode

id

tag

cell

span

gap

gapBefore

gapAfter

gapTop

gapLeft

gapBottom

gapRight

spanY

spanY

spanX

spanX

push

push

pushY

pushY

pushX

pushX

split

split

skip

skip

external

flowX

flowY

grow

newline

newline

wrap

wrap

dockNorth

dockWest

dockSouth

dockEast

x

y

x2

y2